Hiatts Reusable Key-Cuffs™ Instructions for use

STEP 1

Pre loop the Key-Cuff™ by inserting the tip into the locking head and pull up approximately 100mm (4"). The strap serration should be on the inside.

STEP 2

Place around subjects wrists and pull tip through locking head. Only a minimal amount of force is needed. Do not apply tighter than required to prevent escape.

STEP 3

Remove Key-Cuff™ by using standard handcuff key. Insert key into the keyhole and apply gentle clockwise pressure and release the strap.

CAUTION

Test Key-Cuff™ before each use for proper operation of locking mechanism. Key insertion will become easier with use.
Unlocking requires gentle turning pressure on the key. Excessive pressure will damage the locking mechanism.